Stokke® Sleepi™ Bed V3

The lacquers used for the Stokke® Sleepi™ range are water and polyurethane based. Both variants comply with the prevailing safety standard EN 71 - 3, "European Standard, Safety for toys, Migration of certain elements/Toxic Heavy Metals", devised to show whether soluble metals could be absorbed by the body should a child chew on or lick the paint of a product. The lacquers used for the Stokke® Sleepi™ contain no formaldehyde.

In addition to this, the Stokke® Sleepi™ range complies with general European product safety standards for children's cribs and beds EN 716-1 and EN 113-1.

The caster wheels which come with the Stokke® Sleepi™ Mini and Bed can only be used up to the stage when the side panel of the Sleepi™ Bed is removed to allow the child unaided access to the bed. The caster wheels must not be used under the Stokke® Sleepi™ Junior Bed, as this would jeopardize the stability of the bed.

At Stokke®, quality and safety are the main concern and we take great care in ensuring all our products meet current international safety standards for baby and children`s products.

All Stokke® Sleepi™ wooden components are manufactured from cultivated beech, which makes them strong, solid and durable. The preservation of the environment is very important to Stokke®, therefore, we strictly adhere to responsible wood sourcing and processing from European forests.

The lacquers used for the Stokke® Sleepi™ fully comply with the prevailing safety standard EN 71 - 3, "European Standard, Safety for toys, Migration of certain elements/Toxic Heavy Metals". Furthermore, the lacquer is completely free of formaldehyde.

All Stokke® Nursery Textiles are approved by the International Oeko-Tex Association and certified according to Standard 100 by Oeko-tex, product class I which means they are free from harmful substances.

The below is a list of the most important safety standards and regulations applicable to the products, and that the products are regularly tested to.

Stokke AS, Parkgata 6, 6003 Ålesund, Norway hereby declares that the following products meets all applicable and relevant parts of the below listed standards and regulations.

Products:
Stokke® Sleepi™ Mini, Stokke® Sleepi™ Bed, Stokke® Sleepi™ Mini Mattress, Stokke® Sleepi™ Bed Mattress (and accessories), Stokke®Sleepi™Dresser, Stokke®Sleepi™Changing Table, Stokke®Sleepi™Changer Top

Safety standards and regulations:

United States and Canada:
16 CRF 1500 Federal Hazardous Substances and Articles Act
16 CFR 1501 Small Parts
16 CFR 1220 Safety Standard for Non-Full-Size Baby Cribs
16 CFR 1218 Safety Standard for Bassinets and Cradles
16 CFR 1241 Safety Standard for Crib Mattresses
ASTM F406-19 Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
ASTM F2194-16e1 Standard Consumer Safety Specification for Bassinets and Cradles
CPSIA Section 101 Total Lead
CPSIA Section 108 Phthalates requirements
SOR/2016-152 Hazardous Products Act – Cribs, Cradles and Bassinets Regulations
ASTM F2933-21a Standard Consumer Safety Specification for Crib Mattresses
16 CFR 1633 Standard for the flammability (open flame) of Mattress sets test
16 CFR 1632 Standard for the flammability of mattresses and mattress pads.
ASTM F2057-19 Standard Safety Specification for Clothing Storage Units Safety Standard for Baby Changing Products
ASTM F2388-18 Standard Consumer Safety Specification for Baby Changing Products for Domestic Use
16 CFR 1235 Safety Standard for Baby Changing Products
ASTM F1917-20ε1 Standard Consumer Safety Performance Specification for Infant Bedding and Related Accessories

European Union:
2001/95/EC European Product Safety Directive
EN 71-3:2019 Migration of Certain Elements
EN 716-1:2017+AC:2019 & EN 716-2:2017 Children's cots and folding cots for domestic use
EN 1130: 2019/AC: 2020 Cribs and cradles for domestic use
EN 16890:2017+A1:2021 Children's furniture - Mattresses for cots and cribs – Safety requirements and test methods
REACH Annex XVII and SVHC
EN 14749: 2016 Furniture - Domestic and Kitchen Storage Units and Kitchen-Worktops
EN 12221-1/2: 2008 + A1:2013 Safety Requirements and Test Methods for Changing Units for Domestic Use
Furniture and Furnishings (Fire Safety) Regulations 1988/1989, 1993 and 2010 (UK)

Asia/Pacific:
Australia:
Consumer Protection Notice No. 6 of 2005 Consumer Product Safety Standard: Children’s Household Cots
AS/NZS 2172 : 2013 Safety Requirements for Cots for Household Use
AS/NZS 8811.1:2013 Methods of testing infant products Method 1: Sleep surfaces - Test for firmness
AS/NZS 4790:2006 (R2016) Furniture Storage units - Determination of strength and durability
China:
GB28007-2011 General Technical Requirements for Children’s Furniture
GB6675-2014 Chinese Toy Standard
Q31/0104000188C005-2020-01 Stokke Enterprise Standard for Mini crib
QB 2453.1-1999 Children's Cots and Folding cots for Domestic Use
Q/STOKKE 008—2021 Stokke Enterprise Standard for Wooden storage units
Q/STOKKE 007—2021 Stokke Enterprise Standard for Children's Changing Units

Sleepi from September 2022 (V3)

Through its modular, adaptable features, the SLEEPI™ Bed in fact comprises 2 cots, corresponding to subsequent growth stages of the child:

• Stokke® Sleepi™ Mini (approx. 0-6 months), 82,3 x 63,5 x 78 cm
• Stokke® Sleepi™ Bed (approx. 6 months to 5 years, but can also be used from birth), 141,3 x 74,2 x 78 cm

The Sleepi™ is purchased as mini and bed and Stokke® offers a bed extension extend the mini into the bed size. The mini and the bed come without mattresses. In some markets you can buy a package, some have the mattresses included, while other markets don't.

Please note that there is no extension kit to downsize the SLEEPI™ Bed into a Mini, nor can the necessary parts be ordered separately.

Sleepi before September 2022 (V2)

Through its modular, adaptable features, the SLEEPI™ Bed in fact comprises 3 cots, corresponding to subsequent growth stages of the child:

• Stokke® Sleepi™ Mini (approx. 0-6 months)
• Stokke® Sleepi™ Bed (approx. 6 months to 3 years, but can also be used from birth)
• Stokke® Sleepi™ Junior (from approx. 3 years - 10 years)

The Sleepi™ is purchased as mini and bed and Stokke® offers a bed extension and a jr extension to extend the mini into the bed size and the bed size into the jr. The mini and the bed come with mattresses included, and in addition the Coco Mat is available to fit both beds. With the extension kits you can choose which mattress to purchase. In some markets you can buy a package, but some have the mattresses included, while other markets don't. Please note that there is no extension kit to downsize the SLEEPI™ Bed into a Mini, nor can the necessary parts be ordered separately.

Finally, we offer the SLEEPI™ Junior Extension, comprising additional parts needed to convert the Stokke® Bed into the Sleepi™ Junior.

Production until September 2022 / Compatibility with Production from September 2022

Stokke® Sleepi™ Drape Rod / No compatability
Stokke® Sleepi™ Bed Extension / No compatability
Stokke® Sleepi™ Junior Extension / No compatability
Stokke® Sleepi™ Bed Mattress / No compatability
Stokke® Sleepi™ Mini Mattress Mini Mattress US / Yes, but we recommend to use the New breathable
Stokke® Sleepi™ Mini Protection Sheet / Yes, but we recommend to use the New breathable Mattress Protection sheet
Stokke® Sleepi™ Bed Protection Sheet / No compatability
Stokke® Sleepi™ Mini Bumper / Yes, but we recommend to use the new Stokke Mesh Liner
Stokke® Sleepi™ Bed Bumper / No compatability
Stokke® Sleepi™ Canopy White / Yes
Stokke® Sleepi™ Bed Fitted Sheet / No compatability
Stokke® Sleepi™ Mini Fitted Sheet / Yes

Yes, the Sleepi Bed and Textiles are developed with highest saftey standards and testing to provide a safe sleep solution for your baby :

Bed :
Bar bed design is providing an optimal airflow in the crib.

Textiles :
Firm and breathable mattress to minimize the risk of suffocation and CO2-Retention. ​The Mattress has a tight fit to the bed which is minimizing the risk of entrappment between bed and mattress​. Mesh Mattress protection cover with excellent breathabilty properties giving a safer choice than an ordinary Protective sheet.
Canopy is surrounding the Drape rod completely to have a safe attachement and the baby is not able to remove or drag the fabric into the crib. ​Canopy should be always attached to the bed for more safety. Short cords are also there for more safety and reduced risk on strangulation. ​
Mesh Liner keeps baby’s arms and legs safely in the crib.​
To prevent strangulation and suffocation, breathable transparent 3D mesh is used as the main textile optimal airflow. Anti-Slide velcro attachements holding the mesh liner safely in place and can not be removed by the baby. The Mesh liner should be always used in the highest position

The Stokke® Sleepi™ fully complies with the following British/European Standards:

• BS EN 1130-1:1997 Furniture – Cribs and cradles for domestic use – Part 1: Safety requirements. This standard deals with safety requirements of all aspects of the product, such as materials, construction, stability and even packaging.
• BS EN 716-1:2008 Furniture – Children’s cots and folding cots for domestic use – Part 1: Safety requirements. This standard has a more specific focus on safety requirements for aspects such as flammability, edges and protruding parts, gaps between parts, small parts, shear and squeeze points, etc.

A certificate of compliance issued by independent UK-based testing institute Bureau Veritas is available upon request.